Here is the Purification Equipment Fiberglass Tower manufacturer talking about Purification Tower Exhaust Gas Absorption Tower.
If you have any idea about the Purification Tower, welcome to contact us and discuss.
With the increase of environmental protection laws and more and more environmental protection equipment, the exhaust gas purification tower has become a commonly used environmental protection equipment. Why is it commonly used the equipment? Is there any difference?
The Purification Tower exhaust gas absorption tower should have the following basic requirements:
1. It has sufficient mechanical strength and corrosion resistance.
2. The structure is simple, easy to manufacture and overhaul
3. The equipment has low resistance and low energy consumption.
4. The gas and liquid in the tower should have sufficient contact area and contact time.
5. The gas and liquid two have strong disturbances, reduce mass transfer resistance and improve absorption efficiency.
6. Wide operating range, stable operation.
The purification tower exhaust gas absorption tower has the function of removing harmful gases in the exhaust gas, has the advantages of wide application range, high purification efficiency, low equipment resistance, and small occupied area, and is a common purification device in the exhaust gas treatment project. The products are widely used in the purification of toxic and harmful gases such as NOX, SO2, H2SO4, HCl, HF, SIF4, CO2, etc. produced in chemical processing, electroplating, hardware, electrical appliances, medicine, printing and dyeing, telecommunications, watches, and clocks, etc. Deodorization treatment of odorous substances such as ammonia, hydrogen sulfide, phenol phosgene, formaldehyde, methanol, amines; the filtration area depends on the amount of treatment, the neutralization effect is 95%; the discharge port is <10 PPM.
The purification tower exhaust gas absorption tower has the characteristics of wide application range, high purification efficiency, low equipment resistance, and small floor space. It is used to remove harmful gases from the exhaust gas. It is mainly used for exhaust gas purification equipment of FRP. It has a reasonable product design and adopts the latest high-tech fillers. It has less resistance loss, large specific surface area, perfect chemical reaction, and gas-liquid ratio. Reasonable, high absorption and purification efficiency, corrosion resistance, good aging resistance, easy to install and maintain.
October 20, 2021
October 12, 2021
September 30, 2021